Skip to content

Chef Blender

Chef Blender

User Guid

Congrats! You’re about to embark on an amazing journey with your Portable Chef Blender. Here you will find everything you need to know to get the most out of your blender.

YOUR FIRST BLEND.....

1. Charge your Chef Blender with the included USB cable for about 1 hour or until the light ring shows a solid blue circle.
2. Ensure the arrows on the rear of the jar and base are closely aligned.
3. Clean your Chef Blender prior to first use: add water, a drop of soap, blend and rinse. (Deep clean as needed – see “Cleaning” section for details.)
4. Add liquid first, then throw in your solids. Leave a little room at the top.
5. Tighten the lid and press the power button to blend for one 20-second cycle. Repeat as needed for thicker blends.
6. Enjoy your blended creation and clean immediately after each use

CHARGING.....

1. Using the included USB-C cable, you can charge your Chef Blender with most USB ports, from your phone charger, to your computer, to the USB port in your car.
2. Your Chef Blender takes about 1.5 hours to fully charge, and lasts for 15+ blends.
3. The light ring around the power button indicates battery level while charging. As your Chef Blender charges, the lights will change from purple to blue. When 3 the light around the power button forms a complete blue circle, your Chef Blender is fully charged.
4. The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low.
5. The circle will flash red and purple when the battery is dead and it’s time to recharge. Do not charge your Chef Blender when it’s wet.

A MODE FOR EVERY DAY.....

Chef Blender has two easy-to-use modes: Blend Mode and Pulse Mode.

BLEND MODE:

Click the power button once to start blending. The green ights will be flashing. Slightly tilt it back and forth while blending if desired. Click once again to pause it from blending.

PULSE MODE:

Double click the power button to enter into pulse mode. While yellow lights flicker, press and hold the power button repeatedly to pulse. Pulse mode will automaticlly ends after 5 seconds of activity and yellow lights will turn off

TROUBLESHOOTING

FLASHES RED AND GREEN LIGHT

If red and green lights flashes aternately, it means the cup body is not tightened, and you need screw the cup onto the blender base again to make sure the arrow is aligned with the on-off switch.

SOLID RED LIGHT

If the light flashers for 8 seconds, it means the ingredients are too large. You need too cut the ingreadients into small pieces or switch to the pulse mode.

EASY CLEANING

Skip the tedious cleaning steps, just add water and an optional drop of soap and press the power button and you’ll have a clean Portable Chef Blender!

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS While using appliances. you should always follow basic precautions to reduce the risk of fire, electric shok, or personal injury, including the following: